Cantilever pumps VNZ K Series 8, 20, 45, 50, 65, 80, 100 and others .

K 8/18, K 8/18a
The K 8/18 pump is a cantilever type pumping equipment and is designed for pumping clean water (not seawater) with an active acidity ranging from 6 to 9 pH. The pumps are also used for pumping other liquids similar to water in density, viscosity and chemical activity, containing solid inclusions up to 0.2 mm in size, the volume concentration of which does not exceed 0.1%.

By 20/18
Pumps K 20/18 are horizontal, supported on the housing and driven by an engine through an elastic coupling, cantilever pumps. The cantilever pump K 20 18, like any pumping equipment for water, is designed for pumping liquids similar to water in density, viscosity and chemical activity, containing solid inclusions up to 0.2 mm in size, the volume concentration of which does not exceed 0.1%, with a pH from 6 to 9 and a temperature from 0 to + 85 °S.

By 20/30, By 20/30a
The K 20/30 pump is used for pumping, in stationary conditions, water (except sea), as well as other liquids having, like water, an active acidity in the range from 6 to 9 (pH) and the same physicochemical properties and containing solid inclusions up to 0.2 mm in size, the volume concentration of which is not exceeds 0.1%.

K 45/30, K 45/30a, K 45/55, K 45/55a
The pump K 45/30, K 45/55 is a single-stage cantilever with a one-way liquid supply to the impeller of a closed type centrifugal pump. Pumps K 45 30, K 45/55, representing pumping equipment for water, are designed for pumping water in stationary conditions (except sea).

To 90/20, To 90/20a, To 90/35, To 90/35a, To 160/30, To 160/30a, To 160/30b, To 290/30, To 290/30a
Cantilever pumps K 90/20 (a), K 90/35 (a), K 160/30 (a, b), K 290/30 (a) are designed for pumping industrial water with a pH from 6 to 9 (except marine) and other liquids similar to water in density, viscosity and chemical activity in water supply, heating, circulation systems. The size of solid inclusions is up to 0.2 mm with a volume concentration of not more than 0.1%.

To 50-32-125, To 50-32-125a
Pump K 50-32-125 (a) is a horizontal, cantilever, single-stage, centrifugal pump. The liquid supply is carried out horizontally along the pump axis, the discharge is vertically upward in the plane passing through the pump axis. The cantilever pump K 50-32-125 (a) pumps in stationary conditions water (not used for pumping seawater) and other liquids having the same acidity (pH) with water in the range from 6 to 9 and the same physico-chemical parameters and containing solid inclusions up to 0.2 mm in size, the volume concentration of which does not exceed 0.1%.

K 65-50-125, K 65-50-125a
Pumps K 65-50-125 (a) are manufactured in accordance with TU 3631-002-02950378-02 and are single-stage horizontal centrifugal pumps with one-way fluid supply to the impeller. The cantilever pump K 65-50-125 (a), like other pumping equipment of this type, is used for pumping clean water (except sea water) with an acidity (pH) from 6 to 9, as well as other liquids similar to water in density, viscosity and chemical activity containing solid inclusions up to 0.2 mm in size, the volume concentration of which does not exceed 0.1%.

K 65-50-160, K 65-50-160a
The cantilever pump K 65-50-160 (a) is a single-stage, horizontal, with a liquid supply horizontally along the axis and a vertical vertical duct in the plane passing through the axis of the centrifugal pump. Like any cantilever pumping equipment, the K 65-50-160 (a) pump is used for pumping water (not used for pumping seawater), liquids having the same physical and chemical properties with water, pH from 6 to 9 units. and containing solid inclusions up to 0.2 mm in size, the volume concentration of which does not exceed 0.1%.

To 80-50-200, To 80-50-200A, To 80-65-160, To 80-65-160a
Horizontal cantilever pump type K 80 (pump K 80-50-200 and pump K 80-65-160) is a single-stage, horizontal, centrifugal pump, with horizontal fluid supply along the axis and discharge vertically upwards. Cantilever pumps K 80 have found application for pumping water (but not seawater), as well as various liquids similar to water in physico-chemical properties, with a hydrogen index (pH) from 6 to 9 units. and containing solid inclusions up to 0.2 mm in size, the volume concentration of which does not exceed 0.1%.

To 100-80-160, To 100-80-160a, To 100-80-160b, To 100-65-200, To 100-65-200a, To 100-65-250, To 100-65-250a, To 100-65-250b
Single-stage cantilever, horizontal centrifugal pump type K 100 (pump K 100-80-160, K 100-65-200, K 100-65-250) is designed for pumping water in stationary conditions. Pump with horizontal fluid supply along the axis and discharge vertically upwards. Cantilever pumps K 100 also pump other liquids having the same physical and chemical properties as water.

To 150-125-250, To 150-125-250a, To 150-125-315, To 150-125-315a
Single-stage cantilever, horizontal centrifugal pump type K 150 (pumps K 150-125-250, K 150-125-315) are designed for pumping industrial water with a pH from 6 to 9 (except marine) and other liquids similar to water in density, viscosity and chemical activity in water supply, heating, circulation systems. The size of solid inclusions is up to 0.2 mm with a volume concentration of not more than 0.1%.

To 200-150-250, To 200-150-250A, To 200-150-315, To 200-150-315a, To 200-150-400, To 200-150-400a
A single-stage cantilever, horizontal centrifugal pump of the K 200 type is designed for pumping industrial water with a pH from 6 to 9 (except marine) and other liquids similar to water in density, viscosity and chemical activity in water supply, heating, circulation systems. The size of solid inclusions is up to 0.2 mm with a volume concentration of not more than 0.1%.

DOCUMENTATION

• Series K. Technical characteristics.

Price list

Questionnaire